Subscribe to The Image EngineerRSS Feed

/* Archive for interior */

Expose for Inside and Out

The framing of the shed I am building.

For the past six weekends, I’ve been building myself a storage shed in my backyard. This past Labor Day I finally completed it and started loading it up with my junk stuff.

I had been taking photographs all along it’s progress and in looking back at all of the images, I thought I would share a technique I use to balance both the indoor and outdoor light.

This first image was early on in the framing stage.  You don’t think of this as an interior photograph, but if I had just exposed for the sky, the framing would have been underexposed, and you would have seen no detail in the framing at all.   Alternately, if I tried to properly expose the framing, the sky would be blown out.   Solution — balance the light with your flash!

// Read the rest of this entry »


Comments

A Painting Weekend

This past weekend we painted two bedrooms. Brittany’s was painted on Saturday and Henry had his done on Sunday.

After completing the job I decided to play with a couple strobes when taking an “After” shot. I placed one strobe on a lightstand and bounced it off the ceiling at 1/8 power. A second strobe at 1/32 power was placed on the floor with a snoot attached and aimed it to hit the lower edge of the dresser and the closet doors. I shot it from the point of view of Henry (9 months).

Painting is not one of my most favorite chores, but when the job is finished, it is rewarding.


Comments